TSG:Tapestry Strap Stitch

Back to Stitches List
Back to Directory of Hand Stitches

TAPESTRY STRAP STITCH

LEFT - Reverse of tapestry; RIGHT - Front of tapestry.
NOTE: Warp yarns are horizontal in this diagram.

Other names

Running Hem Stitch

Directions

Work from the reverse side of the textile. Anchor thread in the strap. Insert the needle between warp yarns of the tapestry and bring out to the tapestry front side at 1. Cross over one warp and insert needle to the tapestry reverse side at 2. The next stitch is done only in the strap (fabric) . Insert needle through the strap to the reverse side at 3. Bring needle out to the front side of the strap at 4. Continue alternating stitches between tapestry and the strap .

Comments

This stitch is used when attaching fabric straps, etc. to a tapestry in the vertical direction. Use a continuous thread, adding additional thread with a weaver's knot, if necessary. Stitches should run in a straight line to facilitate a straight hanging of the piece.

Possible uses for this stitch

Attaching Lining, Dust Covers and Backings
Hemming

Copyright: 2024. The Textile Wiki pages are a publication of the Textile Specialty Group of the American Institute for Conservation of Historic and Artistic Works.